Dish Network 167821, 5.4 L IMITED M, F IXED C HANNEL M

LIMITED MODE

You can program your remote control in Limited Mode to keep from

accidentally changing the channel on your TV or VCR. When Limited

Mode is enabled, you cannot select TV mode. If you press the TV

button while TV mode is programmed in Limited Mode, the TV button

flashes and the SAT button lights, telling you cannot switch to TV

mode. The remote then moves back to SAT mode.

When you use the remote to control your TV in Limited Mode, you ar e

only be able to use the POWER, MUTE, and VOLUME buttons to

control your TV. Also, when you use the remote to control your VCR

in Limited Mode, you are only be able to use the POWER and VCR

function buttons. The secti on Programming Using the Equip ment Code

Tables (page 4) has a step that tells the remote control to go into

Limited Mode. Also, a quick way to put the remote in L imited Mode is

on page S-3, Placing Your Remote in Limited Mode.

Note: Limited Mode cannot be used wi th audio amplifiers.

FIXED CHANNEL MODE

You can program your remote control in Fixed Channel Mode to

automatically set the TV and/or VCR to a given channel when you

press either RECOVER or the SAT button.

AND/OR VCR

1Press and hold the TV or VCR mode button until all four mode

lights illuminate.

2Press the STAR key (*). Enter a channel, using two or th ree digits

between 02 and 125. For example, to set channel 25, enter *25.

3Press the POUND (#) key. The TV or VCR mode button flashes

three times.

1Press and hold the TV or VCR mode button until all four mode

lights illuminate.

2Press the STAR (*) key followed by two zeros (*00).

3Press the POUND (#) key. The TV or VCR mode button flashes

three times.