Connections and Setup
101
YPbPr Connections
YPBPR CONNECTIONS
The YPbPr (component) connections provide high-quality video to your HDTV or HD
monitor.
1Connect between the YPBPR component connections on the receiver and the nearby TV
using component video cables.
2Connect audio (red and white) RCA-type cables between the receiver AUDIO OUTPUTS and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3If you do not see a picture, change the resolution setting on the receiver. Use the steps
below and Setting Up to Display in HD on the next page.
4Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type
connections if you don’t have sound.
No Picture on the Nearby TV
This section will help you make a picture on the nearby TV in the event that you could not
do so in the previous sections.
1Connect RCA-type cable connections between the receiver TV1 Out and the nearby TV.
2Make sure the receiver and nearby TV are on.
3Make sure the nearby TV is set to use the RCA-type inputs. Look on the back of your
HDTV and consult your HDTV user’s guide.
4Change the HDTV settings as described on page102.
5Switch to the nearby TV to display from the HD inputs you selected in the previous
sections. If you have a picture from TV1, you are finished.
6Repeat steps 4 and 5 until the nearby TV displays video from the receiver.
1
34
Connect receiver
and monitor with
YPbPr Component
connections
Turn monitor
and receiver on
and confirm
picture
Confirm
sound and
volume
2
Connect receiver
and monitor with
Audio cables
AUDIO
L
R
SYSTEM INFO
SYSTEM INFO