SPECIFICATIONS

 

 

7500 Series

CHASSIS:

Folded sheet metal and rectangular tube

BODY:

Folded sheet metal

SEAT:

Designed for operator comfort with padded back and arm rests.

 

Seat is adjustable fore and aft.

MOWER DECK:

Two decks are available. Both decks are made of 10 GA

 

fabricated welded construction with 7 GA reinforcement plate.

 

Three blades combine for either a 52" or 60" cut width. Cut

 

height approximately 1.5" to 5" via 7 position lift handle.

BLADE DRIVE:

Electric clutch

DRIVE SYSTEM:

Each rear wheel is independently driven by a HydroGear

 

BDP 10A pump and a HydroGear HGM-15E hydraulic motor.

ENGINE:

23HP Kohler Command, 4-Cycle, V-Configuration, Overhead

 

Valve, Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head, and

 

Crankcase with Cast Iron Liners, Full Pressure Lubrication/Full

 

Flow Filter, Pulse-type Fuel Pump, Fixed Jet Carburetor w/

 

Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual Element

 

Air Cleaner.

STARTING

Electric by key switch operation with safety interlocks on parking

SYSTEM:

brake and blade drive clutch.

TIRES:

Front 13-5.00x6

 

Rear 23-9.50x12

RECOMMENDED Front

12 lbs.

TIRE PRESSURE: Rear

12 lbs.

CAPACITIES:

Fuel - 11 gallons (approx)

 

Hydrostat oil system - 4 qt with in-line 40 micron filter

 

Hydrostat oil recommendation, refer to page 31

 

Engine - 2 qts. SAE 10W30 (with filter)

DIMENSIONS:

Width

61"(52" Deck), 69-1/2"(60" Deck)

 

Height

43"

 

Length

81" (52” Deck), 81” (60” Deck)

 

Weight

915 lbs.(48" Deck), 916 lbs.(60" Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

13

Page 13
Image 13
Dixon ZTR 7523 manual Specifications