11
Operation ❖❖
❖❖
❖English

Digital Thermostat (Solid State Control)

(See Fig. 3, page 20)
• The Digital Thermostat AUTOMATICALLY turns ON when power is applied to unit.
• The thermostat displays the interior temperature constantly.
To access, and/or change the Setpoint temperature, do the following:
1. Press the “set” Button to display the Setpoint temperature. The Setpoint is
changed with the “up” and “down” Arrow Buttons. The last entered Setpoint will stay in
memory. The control automatically returns to NORMAL mode (displaying the interior
temperature) within 5 seconds.
2. Press the “up” Button to INCREASE Setpoint temperature. When held down for a
few seconds, the change rate accelerates.
3. Press the “down” Button to DECREASE Setpoint temperature. When held down
for a few seconds, the change rate accelerates.
Loading the Appliance
All materials exposed to contact with food comply with EC directive 89/109.
Once the thermostat is set to a desired temperature, allow the unit to RUN at least
12 hours (24 hours for best results) before loading it with goods.
Food Storage Time Position In Appliance
Meat or fish properly 2 to 3 days On the rack under the freezer
wrapped in plastic compartment
Eggs 1 week Use door compartment
Butter, margarine 1 week Use door compartment
Cooked food, cakes and
soups (in sealed 3 to 4 days On the lowest rack in the refrigerator
containers and cooled)
Cold cuts, cheese,
fresh pasta, pastries,
cream, tomatoes, 3 to 4 days On any rack
puddings, chocolates,
lard
Fruit and vegetables 1 week In the bottom of the refrigerator
For proper food storage and conservation refer to the table below: