XD5220 OPERATION

General Operation

Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Semi-permanentRemove trim ring and install supplied #1 x 7/32” Phillips head Faceplate Installation screw through left side of mounting frame into faceplate.

Power On/Off Press PWR or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press PWR to turn the unit off.

CD Mode Insert a CD or press l/ II to begin or resume playback.

Tuner Mode Press PWR or BAND to begin or resume tuner operation.

Bass Boost Press BASS to activate and deactivate bass boost curve. Activating this feature will enhance the bass frequencies when listening to music at all volumes.

Volume Adjust volume using VOL t / VOL s (00-46).

Mute Press MUTE to silence the audio. “MUTE” will appear in the display. Press MUTE again to cancel.

Display Press DISP to display the clock. The radio frequency (tuner mode) or CD track/elapsed time (CD player mode) show by default.

Set the Clock Press DISP to display the clock, then release. Press and hold DISP for 2 seconds, the clock will begin to flash. Press TUNE

<<to adjust the hours and TUNE >> to adjust the minutes. Clock settings will be saved after 5 seconds.

12/24-hour Clock The clock will display 12-hour AM/PM time in U.S. frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00).

5