XDM6220 WARRANTY
Troubleshooting
Problem | Cause | Action | |
Unit will not turn on | Yellow wire not connected or incorrect voltage | Check connections for proper voltage | |
(no power) | Red wire not connected or incorrect voltage | (11~16VDC) | |
|
|
| |
| Black wire not connected | Check connection to ground | |
|
|
| |
| Fuse blown | Replace fuse | |
|
|
| |
Unit has power | Speaker wires not connected | Check connections at speakers | |
(but no sound) |
|
| |
One or more speaker wires touching each | Insulate all bare speaker wires from | ||
| |||
| other or touching chassis ground | each other and chassis ground | |
|
|
| |
Unit blows fuses | Yellow or red wire touching chassis ground | Check for pinched wire | |
|
|
| |
| Speaker wires touching chassis ground | Check for pinched wire | |
|
|
| |
| Incorrect fuse rating | Use fuse with correct rating | |
|
|
| |
Excessive skipping | Unit is not mounted correctly or backstrap is | Check mounting sleeve and backstrap | |
| not secure | support | |
|
|
| |
| Physical defect in media (CD, | Check media for scratches | |
|
|
| |
Disc read error | Press EJECT or RESET | ||
on display |
|
| |
|
|
| |
Focus error or disc is in upside down | Press EJECT or RESET | ||
on display |
|
| |
|
|
| |
FAT error | Press EJECT or RESET | ||
on display |
|
| |
|
|
| |
MP3/WMA decode error | Press EJECT or RESET | ||
on display |
|
| |
|
|
| |
PROTECT appears | The WMA file is DRM protected | Press EJECT or RESET | |
on display |
|
| |
|
|
| |
Unit will not accept | CD mechanism position out of alignment | Press EJECT for 3 seconds to reset | |
a disc |
| CD mechanism position | |
|
|
| |
| CD transit screws still in place | Remove 2 transit screws located on top | |
|
| of the unit | |
|
|
|
18