9
2. Installation and Connections
FOCUS
MENU
SELECT
LAMP
STATUS
POWER
ON/STAND BYSOURCE AUTO ADJ.
ENTER
EXIT
ZOOM
This section describes how to set up your projector and how to connect video and audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
1Set up a screen and the projector.
2Connect your computer or video equipment
to the projector.
(→ page 13,14,15,16,17,18)
3Connect the supplied power cable.
(→ page 19)
NOTE: Ensure that the power cable and any
other cables are disconnected before moving
the projector. When moving the projector or
when it is not in use, cover the lens with the
lens cap.
Setting Up the Screen and the Projector
Selecting a Location (VT695)
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 21" (0.53 m) measured diagonally when the projector is roughly 38 inches (1.0 m) from the wall or
screen. The largest the image can be is 300" (7.6 m) when the projector is about 389 inches (9.9 m) from the wall or
screen.
300"
240"
200"
180"
150"
120"
100"
60"
40"
30"
21"
80"
Distance (Unit: m/inch)
Screen Size (Unit: cm/inch)
Screen Size
Lens center
609.6(W)457.2(H) / 240(W)180(H)
487.7(W)365.8(H) / 192(W)144(H)
406.4(W)304.8(H) / 160(W)120(H)
365.8(W)274.3(H) / 144(W)108(H)
304.8(W)228.6(H) / 120(W)90(H)
243.8(W)182.9(H) / 96(W)72(H)
203.2(W)152.4(H) / 80(W)60(H)
162.6(W)121.9(H) / 64(W)48(H)
121.9(W)91.4(H) / 48(W)36(H)
81.3(W)61.0(H) / 32(W)24(H)
61.0(W)45.7(H) / 24(W)18(H)
42.7(W)32(H) / 17(W)13(H)
1.0/38
0.7/
29
2.0/77
2.6/103
3.3/129
3.9/155
4.9/194
5.9/233
6.6/259
7.9/311
9.9/389
1.3/
51
FOCUS
MENU
SELECT
LAMP
STATUS
POWER
ON/STAND BYSOURCEAUTO ADJ.
ENTER
EXIT
ZOOM
TIP:
• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.
• The Zoom lever adjusts the image size +/-10%
• For more details on throw distance, see page 11.