10 Making connectionsDX-19L200A12

Connecting an antenna or cable TV (no

box)

To connect an antenna or cable TV (no box):
1Turn off your TV and all connected equipment.
2Connect a coaxial cable (not provided) to the ANT.
IN jack on the back of your TV and to the antenna or
cable TV wall jack.
3Turn on your TV, then go through the setup wizard
on page15.

Connecting a DVD or Blu-ray player

Using HDMI (best)

To connect a DVD or Blu-ray player using HDMI:
1Make sure that your TV’s power cord is unplugged
and the DVD or Blu-ray player is turned off.
2Connect an HDMI cable (not provided) to the HDMI
IN jack on the back of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
To play from a DVD or Blu-ray player using HDMI:
1Turn on y our T V, then press INPUT to open the
INPUT SELECT list.
2Press or to select HDMI, then press ENTER.
3Turn on the DVD or Blu-ray player, then set it to the
output mode. See the documentation that came
with the device for more information.
Notes
Do not tie the coaxial cable together with the
power cord or other cables.
If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Back of TV
Coaxial cable
Back of TV
DVD or Blu-ray player
HDMI cable
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 10 Thursday, November 3, 2011 10:06 AM