Dynex DX-24E150A11 manual

24" LED-LCD TV

QUICK SETUP GUIDE

DX-24E150A11

Remote control	Composite video
and	cable
2 AAA batteries

TV stand and screws

Quick Setup Guide

WE ARE GOING GREEN!

A copy of the User Guide is not provided in the box

but is available at www.dynexproducts.com

Front features

Remote control sensorPower indicator

Volume	Menu Power button
+/-

Channel Input +/-

Installing the stand

1Remove the stand, stand column, and screws from the box.

2Lay the TV flat (screen down) on a flat, cushioned surface. Align the bottom side of the TV with one edge of the table.

3Insert the stand column into the TV stand and secure it with the three stand column screws.

Smaller screws (3)Stand column

4Align the holes in the stand with the holes on the stand column, then secure the stand to the column with the larger screw provided.

Important: The wide portion of the stand should go towards the front of the TV.Large screw Stand

Installing a wall-mount bracket

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the three screws holding the stand column to your TV, then remove the stand and the stand column.

3Secure the wall-mount bracket (not included) to the back of your TV using the four screws provided with the bracket.

Setting up your remote control

1While pressing the release button on the

battery compartment cover on the back of the remote, lift the cover off the remote.

2Insert two AAA batteries into the battery compartment. Make sure that the + and -

symbols on the batteries align with the+ and – symbols in the battery compartment.3Replace the cover.

To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information.

Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)

Universal remote control makers and models					Set-top box makers and models
Philips	RCA	One for All	Sony	Comcast	Dish Network	Motorola	TIVO	DirectTV
PHDVD5, PH5DSS,
	RCU807	URC-6690	RM-VL600	M1057	VIP508, VIP622	DRC800	Series 3, HD	RC23
PMDVR8, PDVR8
115	135	0464	8043	0463	720	0463	0091	10463

Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station

Using HDMI (best)Back of TV

HDMI cable (not included)

HDMI deviceUsing component (better)

Back of TV

Component video device

Component video cable

Component audio cable(not included)

Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable.

Connecting an antenna

Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of your TV and the RF OUT jack on the antenna.

Back of TV

Antenna, cable TV,	75-Ohm coaxial cable
or satellite RF jack

Connecting aVCR, camcorder, or game

(good)

Back of TV

Back of VCRAV cableBack of camcorderor game

Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable.

Connecting to a computer

Back of TV

Computer

Audio cable	D-Sub cable (analog RGB)
(stereo mini plugs)

Connecting headphones

Back of TV

Connecting power

Connect the power cable to a power outlet.Power cordPower outlet