24" LCD TV

QUICK SETUP GUIDE

DX-24L150A11

Remote control
AC power cord
Component
and

 

video cable
2 AAA batteries

 

 

TV stand and screws
Quick Setup Guide
Front and side features

+

-

Installing the stand
1Remove the stand from the box and place it on a table or bench.

Note: Pay close attention to the direction of the stand. The wide portion of the stand must face the front of the TV.

2Lay the TV on a flat, cushioned surface.3 Align the stand with the TV, as shown.

4 Move the stand gently until the locators on the stand column align with the locating grooves on the stand.

5Align the holes in the stand with the holes in the stand column.6Secure the stand to the column with the three screws providedScrew holes
Installing a wall-mount bracket

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the four screws holding the TV to its stand column, then remove the stand column.

3Secure the wall-mount bracket (not included) to the back of your TV using the screws provided with the bracket.

Setting up your remote control

1While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote.

2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment.

3Replace the cover.

To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information.

Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)

Universal remote control makers and models

 

Set-top box makers and models

 

Philips

RCA

One for All

Sony

Comcast

Dish Network

Motorola

TIVO

DirectTV

PHDVD5, PH5DSS,

RCU807

URC-6690

RM-VL600

M1057

VIP508, VIP622

DRC800

Series 3, HD

RC23

PMDVR8, PDVR8

 

 

 

 

 

 

 

 

115

135

0464

8043

0463

720

0463

0091

10463

 

 

 

 

 

 

 

 

 

Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station

Using HDMI (best)

Back of TV

HDMI device

HDMI cable (not included)

Using component (better)

Back of TV

Component video device

Component video cable

Using composite (good)

Back of TV

Video device

N

Composite video cable

Using S-video (fair)

Back of TV

Video device

N

S-video cable

Connecting an antenna

Connect a 75 ohm cable (not included) to ANT/CABLE IN jack on the back of your TV and the RF OUT jack on the antenna.

Back of TV

Antenna cable

Connecting a home theater system
Using analog audio cable:

Back of TV

Audio cable

Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable.

Using digital audio cable:

Back of TV

Note: The DIGITAL OUTPUT jack only works with digital TV channels.