4Installing the stand or wall-mount bracketDX-26L100A13
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Secure the stand to the stand column on the TV with
the six screws M4 type (16 mm) provided.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches. If the base is not connected,
skip to Step 3.
2Remove the six screws that secure the base to the
stand, then remove the base.
3Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
TV components
Package contents
• Remote control and batteries (2 AAA)
• Stand with screws
•Quick Setup Guide
• Important Information
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the M4 wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
7.87 in. (200 mm)
3.94 in. (100 mm)
Wall mount bracket holes
12-0204_DX-26L100A13 MAN_V1_EN.book Page 4 Monday, June 11, 2012 3:03 PM