Wall mount installation guide
(not included)
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
(AV)
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
CABLE
AUDIO/VIDEO OUT
AUDIO/VIDEO
OUT
Video
Stand column
TV stand
ST4 screws (12mm length)
(4 pcs. )
M4 screws (14 mm length)
(4 pcs.)
VIDEO QUALITY
1 2 3
4 5 6
7 8
0
9
PICTURE
INPUT
MENU EXIT
CCD
FAV
HOME
ASPECT
VOL
ENTER
CH
INFO*
AUDIOMTS/SAPSLEEP
DX-RC5NA-15
QUICKSETUP GUIDE40" LED TV
DX-40D510NA15
Included accessories
Remote control
and two AAA batteries
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection.
Note: You can also connect a DVI device to your TV. See your online User Guide for
connection instructions.
Note: Images do not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Dynex television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.dynexproducts.com,
click Support & Service, enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click Search.
Features
Front view
Back view
OVER
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
Multi-purpose jacks:
You can plug any
device that uses HDMI into either HDMI jack.
However, certain devices must be plugged
into the HDMI1 (DVI) jack. See the
documentation that came with your DVI
device.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest
upgrading to HDMI if your de vice
supports it.
Using an HDMI cable (BEST)
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
How do I connect my TV to an antenna or cable wall jack?
Component cable option
AV cable option
MAKING CONNECTIONS
How do I watch TV (cable or satellite box) and/or connect a device such as a
DVD or Blu-ray disc player, game station, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
A Carefully place your TV face-down on a cushioned, clean surface
to protect the screen.
B See the instructions that came with your wall mount for more
information about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: Phillips screwdriver and a soft surface to lay the TV on.
A
Carefully place your TV face-down on a cushioned, clean surface to
protect the screen.
B Secure the stand column to your TV with the four provided
M4 × 14 mm screws (the longer ones).
C Find the front of the TV stand, then secure it to the stand column
with the four provided ST4 × 12 mm screws (the shorter ones).
Note: Connect the yellow video
cable to the green VIDEO/Y jack
on the back of your TV.
Before using your new product, please read these instructions to prevent any damage.
AB
(DVI)
(DVI)
Power indicator
Remote control sensor
INPUTMENU CH CH
VOL+-LOV
Note: The control buttons are on the
bottom edge of the screen.
A
M4 (14 mm) screws
B
Front
ST4 (12 mm) screws
C
(DVI)
(Coaxial)
(DVI)
ANT/CABLE
(Coaxial)