Dynex DX-40L150A11 manual

40" LCD HDTV

QUICK SETUP GUIDE

DX-40L150A11

Remote control	AC power	L/R audio	Component
and	cord	cable	video cable
2 AAA batteries

TV stand and screws (4)

Side buttons

Installing the stand

1Remove the stand from the box and place it on a table or bench.2 Lay the TV on a flat, cushioned surface.3 Align the stand with the TV, as shown.4Secure the stand to the column with the four screws provided.

Installing a wall-mount bracket

1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.

2Remove the four screws that secure the TV to the base, then remove the base.

3 Remove the four screws holding the stand bracket to the TV, then remove the stand bracket.

Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station

Using HDMI (best)

Back of TV HDMI device

HDMI cable (not included)

Using component (better)

Back of TV	Component video device
	Component	Audio cable
	video cable

Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white.

Using S-video (fair)

Back of TV

	VCR
S-Video	Audio cable
cable

Connecting an antenna

Wall jack75-Ohm coaxial cable

Back of TV

Cable box or satellite receiverHDMI cableVideo or S-Video cableComponent cable

Connecting a home theater system

Using an analog audio cable:

Back of TV

Audio amplifier

Audio cable

Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable.

Using a digital audio cable:

Back of TV Digital sound system

Digital optical cable

4 Secure the wall-mount bracket 200 mm M6 screws

to the back of your TV using the screws provided with the wall-mount bracket.

200 mm

Setting up your remote control

1Press down on the battery compartment cover lock, then remove the remote control cover.

Quick Setup Guide	2 Insert two AAA batteries into the battery compartment. Make sure that the
	+ and – symbols on the batteries match the + and – symbols in the battery
	compartment.
	3 Replace the cover. Make sure that the lock snaps into place.
	To program your existing remote control to work with your Dynex TV, see the
	table below for common codes. If you have problems programming your
	remote, or need a different remote control code, visit
	www.dynexproducts.com for the latest remote control code information.
			Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)
	Universal remote control makers and models					Set-top box makers and models
	Philips	RCA	One for All	Sony	Comcast	Dish Network	Motorola	TIVO	DirectTV
	PHDVD5, PH5DSS,
		RCU807	URC-6690	RM-VL600	M1057	VIP508, VIP622	DRC800	Series 3, HD	RC23
	PMDVR8, PDVR8
	115	135	0464	8043	0463	720	0463	0091	10463

Using composite (fair)

Back of TV

Game consoleSide of TVCamcorderAV cable

Back of TV

VCR

AV cable Audio cable

Note: The DIGITAL OUTPUT jack only works with digital TV channels.

Connecting a computer

Back of TV

Audio cable	VGA cable
	Computer