Package contents

•Digital picture frame
•AC adapter
•Remote control
•User Guide
• Quick Setup Guide

Connecting the AC adapter

1Complete all other connections.

2Plug the small AC power connector into the DC 5V jack on the side of your digital picture frame, then plug the other end into an AC power outlet.

Quick Setup Guide

DX-DPF7-10 7" Digital Picture Frame

Features

Top view

 

 

 

 

 

 

 

Side views

 

 

 

Copy/

 

Left

 

Mode/EnterDelete￿arrow ￿

 

 

 

 

Rotate￿

 

 

Right

 

 

 

 

 

PowerExit

 

 

 

arrow ￿

 

 

 

 

 

 

 

 

 

 

Memory card slot USB port DC 5V jack

Positioning your digital picture frame

Your digital picture frame has a built-in stand. The stand can be rotated to support the frame in either a horizontal or a vertical position. Make sure that the stand is rotated to a position indicated on the back of the frame in order to ensure stability. Your frame can also be wall-mounted. Please use the slots on the back of the frame for either horizontal or vertical mounting.

NOTE: Hardware for mounting your frame is not included.

Installing the remote control battery

NOTE: A battery comes pre-installed in your remote control. To activate the battery, remove the plastic shipping tab from the battery tray.

WARNING: There is a danger of explosion if the battery is not replaced correctly. Replace with the same or equivalent type battery.

1Turn the remote control over to the back side.

2Push the release tab to the right and pull the battery tray out of the remote control.

3If this is the first time you will be using the remote control, remove the plastic shipping tab that covers the battery. -OR-

If you are replacing the battery, remove the old battery and insert a new lithium coin cell battery (CR2025) into the battery tray. Make sure that you match the + symbol on the battery with the + symbol on the battery tray.

4Slide the battery tray back into the remote control until it clicks into place.

Step 2

Step 3

Step 4