Setting up your digital picture frame

#

Item

 

Description

6

DOWN

/ROTATE

Press to navigate the on-screen menus

 

or to rotate a photo.

 

button

 

 

7

PREV

button

Press to navigate the on-screen menus

 

or to view the previous photo.

 

 

 

8

NEXT

button

Press to navigate the on-screen menus

 

or to view the next photo.

 

 

 

Remote control

 

 

1

 

4

 

 

5

 

 

 

 

 

 

6

 

2

 

7

 

 

8

 

 

 

9

 

 

 

6 /, '(

3

10

 

 

 

Digital Picture Frame

#

Button
Action

1

MENU

Press to enter the Setup Menu.

2

PREV

Press to move the cursor to the

 

left or to access the previous

 

 

 

 

photo.

3COPY/DEL. Press to copy a photo into frame memory or to delete a photo from the frame.

4

EXIT

Press to return to the Main menu

 

 

or to enter the card selection

 

 

screen when the Main Menu is

 

 

displayed.

5ZOOMPress to enlarge the displayed photo by 100%, 117%, 133%, 150%, or 200%.

6

UP

Press to move the cursor up.

 

 

7PLAY/PAUSE/MODE Press to confirm a selection, pause a slide show, or change modes (Slide Show, Browse, Thumbnail).

8

NEXT

Press to go to the next photo.

 

 

9DOWN /ROTATE Press to navigate the on-screen menus or to rotate a photo.

10 SLIDE SHOW

Press to enter Slide Show mode.

Setting up the remote control

Note: Pull the plastic tab sticking out of the remote control. It protects the battery. The remote control cannot work unless it is removed.

To install or replace the remote control battery:

1Hold the remote control with the control buttons facing downward.

3

2While pressing down on the ridged area of the battery cover, pull the tray out.

3Remove the old battery, if necessary.

4Place a CR2025 lithium battery on the tray with the positive + end facing toward you.

5Close the tray.

Setting up your digital picture frame

To set up your digital picture frame:

1Extend the stand from the back of your digital picture frame.

2Rotate the stand to position your frame either vertically or horizontally.

3Place your digital picture frame on a flat surface.

4Plug one end of the AC power adapter into your digital picture frame.

5Plug the other end of the AC power adapter into a wall outlet.

6 Insert a memory card or USB device into the appropriate slot.

Note: The card only fits in one direction. Do not force it. The card should fit snugly when correctly inserted.

7Press the power button on the top of your digital picture frame to turn it on.

Using your digital picture frame

To turn on your frame and select a photo:

1Press POWER on the top of your digital picture frame, the frame turns on.

2Insert a card into one of the card slots or insert a USB memory device into the USB slot. The photos display automatically.

3Press EXIT. The Main Menu opens.

4Press EXIT again to enter the Card Selection screen, then press the PREV or NEXT button to select the card you want.

5Press PLAY/PAUSE/MODE to enter the Slide Show mode. This displays photos, based on the Transition Mode settings.

6Press PLAY/PAUSE/MODE again to enter the Browse mode. Your frame displays a single picture.

7Press PREV or NEXT to select a photo.

8Press PLAY/PAUSE/MODE a third time to enter Thumbnail mode. The thumbnail images appear on the screen in a table.

9Press PREV , NEXT , UP , or DOWNto select a thumbnail, then press PLAY/PAUSE/MODE to show the picture.

To copy photos to your frame:

1Press POWER on the top of your digital picture frame, the frame turns on.

2If your frame is in slide show mode, press EXIT. The Main Menu opens. If the Main Menu is already open, go to the next step.