Dynex dx-drtvm102 Youl l n eed:

13

Need help? Call 800-305-2204

Step 6- Option 2: Installing on a TV with an irregular or obstructed back

1Place the spacers (P or Q) over the mounting holes in the back of your TV.

2If you are using M4 or M5 screws, place M4/M5 washers (N) over the spacers.

1Align the holes you noted on the left TV bracket (B) and right TV bracket (C) with the spacers. The brackets are

marked “R” for the right bracket and “L” for the left bracket. Make sure that the brackets are level.

2Place the washers (N or O) over the holes in the TV brackets, then insert the screws (H, J, or M).

3Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’l l n eed:

HJ

NO

C

B

B

C

PQ

N

M

or

&

or

or

H (4) J (4)

Phillips screwdriver

Screws

M (4) P (4)

or or

or

Washers

or

N (8) O (4)

Spacers

Q (4)

B and C - TV Brackets

Level

DX-DRTVM102_12-1058_MAN_V3_ENG.fm Page 13 Wednesday, April 10, 2013 3:14 PM

Contents

Main DX-DRTVM102 Medium Low Profile Wall Mount with Optional 5 Tilt ASSEMBLY GUIDE Need help? Call 800-305-2204 Safety information and specifications CA UTION: Page Need help? Call 800-305-2204 Tools needed You will need the following tools to assemble your new wall mount: Need help? Call 800-305-2204 Package contents TV Hardware Bag Make sure you have all the hardware necessary to assemble your new wall mount: Step 1: Determine the wall-mount location. Step 2 - Option 1: Installing on a wood stud wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). CA UT ION: R DE Youl l n eed: Note: Mount the wall plate directly onto the concrete surface. CA U TION : DE R Step 3: Determine whether your TV has a flat back or an irregular or obstructed back Step 4: Select screws and spacers CA U TIO N: Page Step 6 - Option 1: Installing on a TV with a flat back Step 6- Option 2: Installing on a TV with an irregular or obstructed back Youl l n eed: Page Page V3 ENGLISH 12-1058