Manuals / Brands / TV and Video / TV Mount / Dynex / TV and Video / TV Mount

Dynex DX-DTVMFP23 Tools needed, Package contents

1 16

Download 16 pages, 5.46 Mb

DX-DTVMFP23

3

Tools needed

You will need the following tools to assemble your new TV wall mount:

ardware

Package contents

Make sure that you have all the hardware necessary to assemble your new TV wall mount:

A Wall Plate (1) C Right TV Bracket (1)

B Left TV Bracket (1) D Plastic covers (2)

Edge-to-edge

stud finder

Pencil

Magnetic Removable Level

Phillips screwdriver

Socket wrench with 1/2"

(13 mm) socket or

adjustable wrench

Measuring tape

Drill

3/16" (5 mm) wood drill bit for

wood stud wall

OR

3/8" (10 mm) masonry drill bit

(concrete only)

Hammer

ABCD

DX-DTVMFP23_14-1054_MAN_V1_ENG.fm Page 3 Friday, September 26, 2014 3:30 PM

Contents

Main DX-DTVMFP23 ASSEMBLY GUIDE TV Wall Mount Safety information and specifications DX-DTVMFP23 Tools needed You will need the following tools to assemble your new TV wall mount: Package contents TV Hardware Bag Installation instructions STEP 1- Determine whether your TV has a flat back or an irregular or obstructed back STEP 2 - Select screws, washers, and spacers CAUTION: STEP 3 - Attaching the plastic covers to the wall plate You l l n e ed STEP 4 - Option 1: Attaching the mounting ha rdware to TVs with a flat back You l l n ee d STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs STEP 5 - Determine wall-mount location STEP 6 - Option 1: Installing on a wood stud wall 4 CAUTION STEP 6 - Option 2: Installing on a solid concrete or concrete block wall . STEP 7 - Mounting the TV to the wall plate Place the TV brackets (B and C) into the slotte d flanges of t he wall plate (A). Congratulations, you have finished the inst allation. Time to watch some TV! Push the bottom of the TV toward the wall until the spring self-locking system clicks into place. If you ever need to remove the TV from the wall plate V1 ENGLISH 14-1054