24 | Maintenance |
General
Problem | Solution |
|
|
Cannot tune to | • The program you want to watch may be |
one or more | blocked through the parental controls. For |
channels | more information, see “Setting parental |
| control levels” on page 17. |
| • The channel may have been deleted from the |
| channel list. You can tune to the channel by |
| pressing the number buttons or you can add |
| the channel back to the channel list. For more |
| information, see “Changing channel settings” |
| on page 15. |
|
|
Cannot access | • If a setting or option is grayed out, it is not |
some items | available in the current input mode. |
|
|
Password is lost | • On the Parental Controls menu, enter 9999 for |
| the password, then set a new password. For |
| more information, see "Setting parental |
| |
|
|
TV cabinet creaks | • When you are using your TV, the temperature |
| inside the cabinet increases. This causes the |
| cabinet to expand or contract, which produces |
| the creaking noise. This is not a malfunction. |
|
|
Buttons do not | • Unplug the power cord for a few seconds, |
work | then plug it back in and turn on your TV. |
|
|
Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.
Maintenance
Cleaning
•Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a weak detergent solution.
•Use an eyeglass cleaner to clean the screen. Never use alcohol, paint thinner, or benzine.
•Before using a chemically treated cloth, read the instructions that came with the cloth.
Specifications
Design and specifications are subject to change without notice. Dimensions and weight are approximate.
TV type | LCD |
TV panel | |
|
|
TV system | |
Channels | VHF: 2 - 13 |
| UHF: 14 - 69 |
| CATV: 1 - 125 |
| CADTV: |
| DTV: 2 - 69 |
|
|
Audio multiplex | BTSC system |
Audio output | 3W × 2 |
|
|
Power requirement | AC 120 V, 60 Hz |
|
|
Power consumption | 65 W |
Dimensions | 24.04 x 18.11 x 8.27 inches |
| (611 x 460 x 210 mm) |
|
|
Weight | 13.7 lbs. (6.2 kg) |
Input terminals | Composite video/left and right audio (2) |
| |
| Component video/left and right audio (1) |
| HDMI (2) |
| VGA/audio (1) |
| Antenna (1) |
|
|
Output terminals | Headphone jack (1) |
| Left and right audio (1) |
| Digital audio (1) |
|
|
Control terminals | Service Port (1) |
|
|
Legal notices
FCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.
FCC warningChanges or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
CanadaThis Class B digital apparatus complies with Canadian
Specifications and features are subject to change without notice or obligation.
For service and support call (800)