Package contents

•USB 2.0 3.5" PATA hard drive enclosure
•USB 2.0 cable A-B
•AC power adapter
•Utility CD with User Guide and Roxio BackOnTrack software
•Accessories:
Screwdriver
Screws (4)
•User Guide
•Quick Setup Guide

System requirements

•Computer with an available USB 2.0 port
•3.5" PATA hard drive
•Windows 7, Windows Vista, and Windows XP operating system.
•MAC OS X version 10.4 or higher operating system.

For highest performance and reliability, install the latest updates and service pack (SP). For Windows, go to the Start menu, then select Windows Update.

Features

Power LED
Activity LED
Power switch
Backup button
USB 2.0 B type
12V DC
Installing your hard drive in the enclosure
1Remove two screws on the left side of panel.
Screw

Screw

Quick Setup Guide

DX-PHD35 3.5" PATA Hard Drive Disk Enclosure

2 Pull out the plastic end cap with the circuit board.
Connecting the enclosure to your computer

 

Note: Make sure you have already installed a hard drive into the enclosure before

 

you connect the enclosure to your computer.

 

 

USB 2.0 A type connector

USB 2.0 B type connector

 

1

Plug the AC power adapter into the 12V DC jack, then plug it into an AC power

 

 

outlet.

 

2

Plug the USB B type connector into the enclosure, then plug the A type

 

 

connector into one of the available USB 2.0 ports on your computer.

 

3

Press the power button to turn on the enclosure. The operating system

 

 

automatically detects and sets up the new drive. The power LED turns on when

3 Connect the drive to the 40-pin data connector and to the power connector on

 

the enclosure/hard drive turns on.

4

If the drive is correctly detected, a new drive letter is assigned.
the enclosure circuit board, then secure the drive to the rails with the four

 

• For PCs, the new drive letter appears in My Computer.
screws (provided).

 

 

• For Macintosh computers, the new drive letter appears on your desktop.

 

 

 

Note for Windows users: If you do not see an additional drive in your system,

 

you must format the new drive. See the instructions below.

 

Note for Macintosh users: If you do not see an additional drive in your system,

 

select Disk Utilities from the Utilities folder, then select the external enclosure

 

and format the drive to meet your requirements.

 

5

If the drive is new and is not formatted, follow the steps below to format the

 

 

drive. Otherwise, continue to“Installing the backup software”.

4Place the hard drive with the plastic cap back into the aluminum housing and secure it with the two screws you previously removed.