Legal notices

3

OUTPUT

Voltage

Min. load

Max. load

Regulation

Ripple

 

 

 

 

and Noise

 

 

 

 

 

+3.3V

30A

0.5A

±5%

50mV

 

 

 

 

 

+5V

28A

0.3A

±5%

50mV

 

 

 

 

 

+12V1

14A

1A

± 5%

120mV

 

 

 

 

 

+12V2

15A

1A

±5%

120mV

 

 

 

 

 

-5V

0.3A

0A

±10%

100mV

 

 

 

 

 

-12V

0.3A

0A

±10%

120mV

 

 

 

 

 

+5Vsb

2.0A

0A

± 5%

50mV

 

 

 

 

 

•Surge: IEC61000-4-5
•ESD: IEC61000-4-2
•Dimensions:
•5.5 × 3.4 × 5.9 inches (W × H × L)
•150 × 86 × 140 mm (W × H × L)
•EMI/RFI: FCC part 15 Class B,EN55022 Class B
•Power Good Delay Time: 100~500mS
•Power Fail Delay Time: >1ms
•Hold-up Time: 16ms Min.
•Line Regulation: ±1%
•Over Current Protection:

•Increase the output current at the +5V rail gradually to 30A~48A. The main output should shutdown

•Increase the output current at the +12V1 rail gradually to 15A~25A. The main output should shutdown

•Increase the output current at the +12V2 rail gradually to 15A~25A. The main output should shutdown

•Increase the output current at the +3.3V rail gradually to 30A~50A. The main output should shutdown

•Over Voltage Protection:

•+5V:7.0V

•+3.3V:4.3V

•+12V:15.6V

•Short Circuit All output to GND

•Hi-Pot Voltage 1500 Vac, Time 2-3 Sec. cut off current 10 mA MAX.

CONNECTORS

•Detachable 24 pin to 20 pin ATX power connector
•6 standard 5 1/4-inch drive connectors
•1 standard 3 1/2-inch drive connector
•1 standard SATA drive power connector
•1 PCI-Express graphic card power connector
•4 pin Intel P4 style power connector

Legal notices

Limited 1 Year Warranty

Dynex warrants that for 1 year from date of purchase as stated on your receipt, it will replace this product if found to be defective in materials or workmanship. If defective, return the item to the store where it was purchased before the expiration of the 1 year warranty period, with your original receipt, and we will replace it with a then-current equivalent Dynex product (or a pro-rated refund at Dynex's option). This warranty is available only for the original purchaser of this product. Dynex will not be responsible for any incidental or consequential damages or for any loss arising in connection with the use or inability to use this product. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. For defective products purchased online, please contact:

www.dynexproducts.com
Dynex support service at 1-800-305-2204. Dynex, Richfield, Minnesota

Copyright and disclaimer

©2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.