Using your TV

17

Warning: The AC plug supplied with this TV is polarized to help minimize the possibility of electric shock. If the polarized AC cord does not fit into a non-polarized AC outlet, do not file or cut the blade. It is your responsibility to have an electrician replace the obsolete outlet. Do not use this plug with an extension cord or other outlet unless the blades can be fully inserted.

3Press the POWER button on the TV or the remote again to turn off the TV.

Note: You can set the TV to turn off automatically by setting the SLEEP timer. In TV mode, the TV will turn off automatically, if there is no input signal for 15 minutes. After you turn off the TV, you should wait at least 5 seconds before you turn it on again.

Selecting a channel

For information on channel numbering, see Understanding US channel numbering.

To select a channel:

•Press the CH – or CH + button on the remote control to go to the next lower or higher channel.

Or

Press the number buttons to select a channel (for example, if you want channel 83, press 8, then press 3).

Or

Press thebutton to go to the last viewed channel.

Viewing the information banner and channel label (digital TV only)

The information banner shows status information (such as the channel number and signal source) on the screen. Additional information is available in digital TV mode.

To view the information banner and channel label:

•Press DISPLAY on the remote to show the information banner and channel label on screen.

Or

Open the CHANNEL SETUP menu to view the channel label.

Viewing the program guide (digital TV only)

To view the program guide:

• Press GUIDE on the remote to show the program guide on screen.

Adjusting the volume

To adjust the volume:

•Press the VOL+ to increase the volume, or the VOL- button to decrease the volume.

•Press MUTE to mute the sound. Press MUTE again to restore the sound (you can also restore the sound by pressing the VOL+ button).