Eagle Electronics Z-9500

CHART SPEED

The rate echoes scroll across the screen is called the

chart

speed. To

change

it, first press

the CHART SPEED key. The chart speed menu

appear on the left side of the screen. Increase the chart speed by

pressing

the

key adjacent to the

up arrow or decrease

by pressing the

key adjacent

to the down arrow. There are 10 steps of chart speed, 1

is the

slowest, 10 is the fastest.

Stop the

chart by pressing the key adjacent

to the STOP label. When

the

chart is stopped, the word STOP appears at the

top

center

portion

of the screen and the STOP label changes to START. The chart can

be started again by pressing the key adjacent to the START label.

Press the

key adjacent

to the CLEAR label to erase these menus.

RANGE

Automatic

When tumed on for the first time, the Z-9500

automatically places

the

bottom signal in the lower

portion of the screen. This is called Auto

Ranging and is part of the automatic function. The range can be

changed

while the unit is in automatic. However, if the bottom depth

goes higher

or lower than a preset depth,

the unit will

change the

range

(autorange) to keep

the bottom

signal on the screen.

Stop

Speed

Clear

PDF compression, OCR, web-optimization with CVISION's PdfCompressor