DIGITAL DEPTH DISPLAY
When the Z-9500 is turned on for the first time,
the
digital depth
display
is located at the
top
left corner of the screen. This
display comes from
a separate digital sonar built into the Z-9500. It displays only the
bottom depth. If it loses the bottom,
the last known depth will flash
on
the
display. When the
digital
finds the bottom, it
automatically displays
the bottom
depth.
The
digital depth function has a number of features and options that
are accessed through
the Digital Display menu. To reach this menu,
first press
the MENU
key. Next, press
the key adjacent to the "More"
label. This brings up the second menu page. Now press the key
adjacent to the Digital Display label. Next, press the key adjacent
to
the "More" label. Finally, press
the
key adjacent to the
"DEPTH" label.
This is the Digital Depth function menu. As you can see below,
this
menu lets you turn the digital sonar display on or off. (NOTE: This
doesn't turn the
digital sonar on or off, only the display.) It can also
display
the
depth in feet, fathoms,
or meters on both the digital sonar
and the
graph.
Depth Disp. On I
Depth in Feet
in Meters
Dept1i iii Fathoms
Depth Disp. OFF
Clear L
I
I
I
To make a change, simply press
the key corresponding to the menu
arrow. If you don't want to make a change, press
the CLEAR key to
exit. For example, to make the Z-9500
display
the
depth in fathoms,
press
the
key adjacent
to the
Depth
in Fathoms" label. The screen
will
clear, revert to the sonar display
with the
depth displayed
in fathoms.
The letters "FM" next to the digital depth signify fathoms scale. "M"
means meters,
and an
means the
digital depth is in
feet.
NOTE: The depth scale on the right side of the sonar screen also
changes according to the selected mode.
30
PDF compression, OCR, web-optimization with CVISION's PdfCompressor