Eagle Electronics Z-9500

UNLOCK

STATIONS

To "Unlock" the

station(s), first press the MENU key, then press

the

key

adjacent to the

"Change Setup"

label. Now press the

key

adjacent to

the "More" label until the "Unlock Stations" menu appears. Press the

key next to that label. The screen shown below appears.

Select Stations

to Unlock

lean lEnten

Simply press

the key next to the station or stations that you wish to

unlock,

then press the key next to the "Enter label. The Z-9500 wilt

return to the last-used loran screen. The stations

you selected are now

locked on to the

current cycle.

Remember,

turning

the unit off, resetting the

unit, or

entering a

new CR1 or initial position erases all cycle Jumps

and locks.

TENTHS

The Z-9500 has the

capability to show all digital numbers in tenths. In

other

words,

it can display the

depth in tenths of a

foot, speed

in tenths

of a mile

per

hour,

etc. Tenths for all functions

are turned on or off with

a menu selection.

To change

tenths, press the MENU key. Next, press

the

key adjacent

to the "More" label. Then

press the key adjacent to the "Digital Display

"label. Next, press

the key next to the "Tenths" label. The screen

shown below appears. Press the key corresponding

to the desired

label. The screen will clear and return to the sonar screen with the

digital numbers displayed in the desired manner.

SPEED FILTER

The speed constant is the amount of filtering done by the receiver.

There are three

levels: light,

medium, and heavy. If

you select light,

the

amount of "jitter" shown on the plotter and navigation displays will

increase, however this will also give you the fastest updates. Conse-

quently, medium and heavy gives less jitter and slower

update

times.

The receiver will default to the medium mode. To change the speed

constant, press the MENU key, then press the key adjacent to the

"Change Setup"

label. Now

press

the

key next to the "More" label unitil

the

"Speed

Filter' label

appears. Press the

key next to that label. The

screen shown at the

top

of the next page appears. Simply press

the ____________

key next

to the

desired speed filter. The Z-9500 returns to the last-used

loran screen using

the speed constant you selected.

100 37

SMALL

DIGITS 46FT 0

H 32°OO.03'

1J79°59.98' 16

192 KHZ

Select Function

Tenths D isp. On

Tenths Disp. Of £

( Clear I

PDF compression, OCR, web-optimization with CVISION's PdfCompressor