RACK-MOUNT INSTALLATION

6.Select the proper holes in the rail that position the cabinet at the desired location in the rack.

7.Install one equipment rail on each side of the rack using four 10-32×1/2” flat-head screws per rail.

8.With one person lifting each side of the cabinet, position the cabinet onto the two equipment rails (see Figure 3).

Carefully slide the cabinet into the equipment rack until the rack-mount ears of the cabinet are flush with the front vertical rails of the rack. Verify that the holes in the ears align with the holes in the rack.

Equipment Rail

Figure 3. Rails Holding UPS Cabinet

4EATON Powerware® 9170+ Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com