Edirol R-09HR Names of things and what they do

8
Names of things and what they do
fig.names1.eps_60
Internal MIC
These stereo microphones are built into the
R-09HR. ➜ “Using the internal microphones”
(p. 37)
Display
The display shows information about the R-
09HR.
➜ “Information shown in the display” (p. 17)
FINDER button
Shows a song list and allows names to be
edited and songs to be deleted or copied.
➜ “Basic operations” (p. 18)
MENU button
Performs the settings for the R-09HR.
➜ “Basic operations” (p. 18)
PEAK indicator
This indicator lights up when the input or
output volume is too high. If the [PEAK
Indicator] is lit while recording, the
recording will be distorted. Decrease the
volume with the [(-) Input Level Button ].
➜ “Adjusting recording levels” (p. 45)
SPEED button
Changes the playback speed of the song.
➜ “Changing the playback speed (Speed)” (p. 64)
REVERB button
The REVERB button turns the reverb feature
on/off and changes the reverb type.
➜
“Applying reverb effects during playback” (p. 65)
REVERB
REVERB is an effect that can be used to, for example,
make it seem as if the sound were being played in a
large hall. Four types of reverb are available: HALL1,
HALL2, ROOM, or PLATE.
➜
“Reverb type” (p. 65)
AB REPEART/SPLIT button
The AB REPEAT button allows the region
between two points (between A - B) to be
played back repeatedly.
Assign marker A and marker B in the song,
and the region between marker A and
marker B will be repeated.
Pressing the button once assigns marker A.
Pressing the button again assigns marker B.
➜ “Repeated playback of a selected section” (p. 56)
Additionally, the file is split when this button
is pressed during recording.
➜ “Splitting Files while Recording (Split)” (p. 51)
4
2
6
3
9
1
10 11
5
8
7
1
2
3
4
5
15
6
7
8
R-09HR_e.book 8 ページ ２００７年１２月１７日 月曜日 午後２時１６分