Edirol V-8 , User transition switching function

39
Switching Between Images
(continued)
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
You can automatically switch between the eight transitions that comprise the user transitions (p. 38) in synchronization
with the BPM. When doing so, the effects will switch in the order of the Position 1–8 settings (steps 2–3 on the
preceding page).
1
Press the [MENU] button to access the menu, and choose “User Transition1”–“User
Transition4.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “User Transition1”–“User
Transition4.”
Choose the menu item for the transition effect that you want to edit.
Press the [ENTER] button to confirm your selection.
2
Use the [ ] [ ] buttons to select “Switching,” and press [ENTER].
3
Use the [ ] [ ] buttons to turn the switching function on/off.
4
Press the [MENU] button several times to close the menu.
5
Turn the [BPM/CONTROL] knob or press the [TAP] button to specify the BPM.
User transition switching function
Transition effects Menu item
260: User01 User Transition1
261: User02 User Transition2
262: User03 User Transition3
263: User04 User Transition4
Menu item Details
Off The transition effect will change according to the position of the video fader (p. 38).
BPMx1 The effects will switch at the same rate as the displayed BPM.
BPMx2 The effects will switch at double the rate of the displayed BPM.
BPMx4 The effects will switch at four times the rate of the displayed BPM.
Example ...
...
2 3 4 5 6 7 81 2 31
Time
Position
beat beat
V-8_e.book 39ページ ２０１０年４月１６日 金曜日 午後５時１４分