APPENDIX
Problem: | Try these Solution | |
Remote Control | ● Check the batteries. | |
Units dose not work. | ● Check the | |
● Make sure anything is blocking between the Remote Receiver and the Remote Control | ||
| ||
| Units. | |
| ● Make sure you are not too far from the projector when using the Remote Control Units. | |
| Maximum operating range is 5m. | |
|
| |
Wireless Mouse | ● Check the cable connection between the projector and the computer. | |
function does not | ● Check the mouse setting on your computer. | |
● Turn the projector before your turn on the computer. | ||
work. | ||
| ||
|
| |
The image data in | ● Check the memory card is inserted properly into PC CARD SLOT. | |
memory card isn’t | ● Check SmartMedia or PC Card Adapter is set properly. | |
● Check MCI mode is selected. | ||
displayed. | ||
● Check the image data is recorded in the memory card properly. | ||
| ||
| ● Start the projector again. | |
|
| |
The image data can’t | ● Check the projector is turned on. | |
be written in, read | ● Check “Card access” in VIEW menu is selected. | |
● Check Control Cable for Serial Port (optional) is connected properly. | ||
from the memory | ||
● Check the memory card is inserted properly into PC CARD SLOT. | ||
card. | ||
● Check Media Card Imager (supplied) is installed in your computer properly. | ||
| ||
| ● Check the setting in Media Card Imager (like Serial Port Setting) is set properly. | |
|
|
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
GB
45