English

11. REFERENCE

11-1. Attaching an Arm Stand

The 630LT-GR can be used with an arm stand by removing the tilt stand and attaching the arm stand to the terminal.

NOTE

•Use an arm stand that satisfies the following.

-When using the 630LT-GR with an arm stand, the arm stand must be VESA approved :

Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad. Use an arm stand that is able to support an object weighing 8.0 kg.

A GS approved arm stand.

-Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.

-Use an arm stand remaining that position where it is manually moved.

-Use an arm stand with the ability to tilt the monitor forward and backward.

•Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the 630LT-GR down as shown below. Do not scratch the panel.

2. Remove the stand by loosening the screws (M4 x 16 mm).

11. REFERENCE 119