(1)ScreenManager®
(2)Mode Switch
(3)Auto Adjustment Switch
(4)Enter Switch
(5)Directing Switch (Left, Down, Up, Right)
(6)Input Signal Selection Switch
(7)Power Switch
(8)Indicator lamp*1
| Name | The monitor status when each lamp on |
| Custom | Custom mode of FineContrast Mode |
| sRGB | sRGB mode of FineContrast Mode |
Left Side | EMU | EMU mode of FineContrast Mode |
| CAL | CAL mode of FineContrast Mode |
| Cal. Alert | Notify that the monitor needs to be recalibrated in CAL |
| mode or EMU mode. | |
|
| |
| Adj. Lock | The monitor functions are locked. |
| Signal 1 | Input signal from SIGNAL 1 is displayed. |
Right Side | Signal 2 | Input signal from SIGNAL 2 is displayed. |
| ON | Operation |
| Power Save | Power saving |
|
|
|
*1 The brightness of indicator lamps can be changed and turned off, when the screen is displayed (Operation mode). See "Indicator setting".
The power status of the monitor when each lamp on
Indicator Lamp | Power status of the monitor | ||
ON | Power Save | ||
| |||
Light | Off | Operation | |
Off | Light | Power Saving | |
Off | Off | Power off | |
|
|
| |
*The unit is designed to be operated with your bare fingers. If you touch the control panel with your gloved fingers or with something left on the control panel, it may not work.
*If there are waterdrops or dew condensation on the control panel, or operating with wet fingers, it may not work properly. In that case, be sure to dry or wipe it up before use.
Rear