Eizo EV2303W 1, 2

36 Chapter 5 Reference

5-2 Attaching the FlexStand

The once removed the FlexStand can be attached to the monitor again with the

following procedures.

1 Put the insertion part of the stand in the slot of the monitor.

At the time, use as a guide that the marks (1) on the stand match to the

screw holes (2) of the monitor.





2 Attach the stand moving the monitor toward the stand.

Make sure that the lock is latched with clicking sound.

CorrectIncorrect

Marks

Screw holes

Contents

Main [Location of Caution Statement] Notice for this monitor Cleaning To use the monitor comfortably CONTENTS Chapter 4 Troubleshooting ...............................31 Chapter 2 Settings and Adjustments ..............13 Chapter 3 Connecting Cables ..........................29 CONTENTS 6 Chapter 1 Features and Overview 1-1 Features 1-2 Controls and Functions Ex. FlexStand 15 1 2 3 4 5 6 7 8 9 17 1-3 Functions and Basic Operation To adjust the screen and color To use the monitor with low power consumption Power-save Settings [At analog signal input] [At digital signal input] Setting On/Off for the EcoView function (power saving function) To make useful settings/adjustments Basic operation of Adjustment menu Chapter 2 Settings and Adjustments 2-1 Utility Disk Disk contents and software overview 2-2 Screen Adjustment Digital Input 1 2 3 4 5 6 2-3 Color Adjustment To select the display mode (FineContrast mode) (1) Press or . (2) Change the mode by pressing or while mode name is displayed. To perform advanced adjustments Independent setting and saving of color adjustment are available for each FineContrast mode. Adjustment items in each mode To adjust the brightness [Brightness] (3) Adjust the brightness with or , and press . To adjust the color temperature [Temperature] To adjust the gamma value [Gamma] To adjust the color saturation [Saturation] To adjust the hue [Hue] To adjust the gain value [Gain] 2-4 Adjusting Volume [Volume] 2-5 Turning off the audio output at Power Saving mode [Power Save] 2-6 Setting On/Off for Power Saving mode [Power Save] 2-7 Turning off the monitor automatically [Off Timer] 2-8 Setting On/Off for the automatic brightness adjustment function [Auto EcoView] 2-9 Shifting to the power saving mode when a person leaves the monitor [EcoView Sense] To set EcoView Sense On/Off To change the detection level 2-10 Setting On/Off for the power saving level indicator [EcoView Index] 2-11 Screen Size Selection To change screen size [Screen Size] To adjust brightness of non-display area [Border Intensity] 2-12 Setting Adjustment Menu Display To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent] 2-13 Setting Orientation To set the orientation of the Adjustment menu [Orientation] 2-14 Locking Buttons 2-15 Displaying Monitor Infomation [Information] 2-16 Enabling/Disabling DDC/CI communication [DDC/CI] 2-17 Setting Power Indicator ON/OFF [Power Indicator] 2-18 Setting Language [Language] 2-19 Setting EIZO logo display ON/OFF 2-20 Resuming the Default Setting [Reset] To reset color adjustment values To reset all adjustments to the factory default settings Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor To switch the input signal 30 To set input signal selection [Input Signal] Chapter 4 Troubleshooting 32 Page Chapter 5 Reference 5-1 Attaching an Arm surface with the panel surface facing down. 1 position to "Landscape". 2 Page 5-2 Attaching the FlexStand 1 CorrectIncorrect 2 Page Page Page 5-5 Glossary Page 5-6 Preset Timing The following table shows factory preset video timing (for analog signal only). FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice Hinweise zur Auswahl des richtigen Schwenkarms fr Ihren Monitor Hinweis zur Ergonomie