25
Chapter 3 Connecting Cables
NOTE
• Power-saving function
When “1” or “2” is selected for
<Input Priority>, the monitor’s
power-saving function works only
when the two PCs are in the power-
saving mode.
• When only one PC is connected, the
input signal is detected automatically
regardless of whether the input signal
1 or 2 has priority.

● To set priority of PC to be displayed [Input Priority]

When two PCs are connected, either one can be displayed preferentially. The
monitor senses the input signal regularly. When the signal that is given priority
with the <Input Priority> setting is input, signal input switches automatically to
the prior signal.
Priority setting Function
1
Signal 1, input from DVI-I connector
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 1 status changes
even when Signal 2 is displayed
2
Signal 2, input from DVI-I connector
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 2 status changes
even when Signal 1 is displayed
Manual The monitor does not detect the PC’s
signals automatically. Select an active
input signal with .
[Input priority setting]
(1) Choose <Others> from the Adjustment menu, and touch .
(2) Choose <Input Priority> from the <Others> menu, and touch .
The <Input Priority> menu appears.
(3) Select “1” or “2” or “Manual” with or , and touch .
The Input Priority setting is completed.
3-2 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to
a USB compatible PC
(2) Windows 98/Me/2000/XP or Mac OS 8.5.1 or later
(3) Supplied EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor fi rst to a PC using the signal cable, and run
the PC.
(2) Connect the supplied USB cable between the downstream USB
port of a USB compatible PC (or another USB hub) and the
monitor’s upstream USB port.
(3) When the USB function setup is completed, the monitor functions
as a USB hub allowing connection to various peripheral USB
devices through its downstream USB ports.
Upstream Downstream
The USB function is set up automatically upon connection of the USB cable.
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the Main Power switch of the
monitor is not turned on, the
connected downstream peripheral
devices do not work.
• Even if the monitor enters the sleep
mode, all the devices connected
to the USB ports (upstream and
downstream) work. (Therefore the
monitor power consumption varies
with connected devices even in the
sleep mode.)
S2111W_UM_EN_v1.3.indd Sec5:25S2111W_UM_EN_v1.3.indd Sec5:25 10/23/2006 3:43:48 PM10/23/2006 3:43:48 PM