Power Spot 700 II™
©Elation Professionals® Lo s Angeles, Ca. - wwww.ElationLig hting.com - Page 31
8.9.8 Adjustments and Calibrations
ADJU
With this function you can adjust and calibrate the positions of the different
wheels and other motors. This feature is reserved for a service technician and
is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the Up and Down buttons to select the function that requires calibration
and press the Enter button to confirm the adjustment or the Mode button to
cancel and return to the menu. Use the Up and Down buttons to set the
adjustment values and confirm once more with the Enter button or use the
Mode button to cancel the operation.
Function
Value
Remark
ADJU
CODE xxxx
Adjustments in the internal setup are code protec-
ted (for authorized persons only).
COL1
- 99 - + 99
Adjustment of the Color wheel 1
COL2
- 99 - + 99
Adjustment of the Color wheel 2
GOB1
- 99 - + 99
Adjustment of the Gobo wheel 1
GOB2
- 99 - + 99
Adjustment of the Gobo wheel 2
GOB3
- 99 - + 99
Adjustment of the Gobo wheel 3
SH T
- 99 - + 99
Adjustment Shutter: Top side
SH B
- 99 - + 99
Adjustment Shutter: Bottom side
PRIS
- 99 - + 99
Adjustment of the Prism wheel
IRIS
- 99 - + 99
Adjustment of the Iris
POFS
- 99 - + 99
Adjustment of the Pan-Offsets
TOFS
- 99 - + 99
Adjustment of the Tilt-Offsets
CLRE
Adjustments in the internal circuit.
ARES
- 99 - + 99
Adjust Reset (wheels stand still after the reset)
VTIL
- 99 - + 99
Software version of Tilt-board
VTR1
- 99 - + 99
Software version of Head- board
VTR2
- 99 - + 99
Software version of Base- board
VTR3
- 99 - + 99
Software version of board no. 4
DBUG
- 99 - + 99
Function not yet available