Elation Professional 700 II DFSE, FEED, EFLG

Power Spot 700 II™
©Elation Professionals® Lo s Angeles, Ca. - wwww.ElationLig hting.com - Page 32
8.9.9 Default Settings
DFSE
This function is used to restore all the factory default settings and presets.
Press the Enter button to confirm this operation or the Mode button to cancel
and return to the menu. When this operation is selected the LED will briefly
readout ok, then return to the previous function. The chart below details the
factory defaults.
Function
Display
Default Settings
DMX Address
D001
D001
Pan reverse
RPAN
ON
OFF 
Tilt reverse
RTLT
ON
OFF 
Automatic lamp on
LAAU
ON
OFF 
Lamp on via DMX
DLOF
ON 
OFF
Display
DISP
D ON 
REV
Cooling fan
FANS
HIGH
REG 
LOOF
LOHI
Feedback
FEED
ON 
OFF
8.9.10 Feedback ”APC”
FEED
The POWER SPOT 700™ is equipped with ”APC,” automatic position
correction. This function automatically corrects the Pan and Tilt movement
should the unit lose step or is obstructed and forced to lose step. Press the
Enter button to access the sub-menu. Use the Up and Down buttons to toggle
between “ON” and “OFF” and confirm once more with the Enter button or use
the Mode button to cancel the operation.
8.9.11 Error and Fault Corrections
EFLG
(These functions are reserved for authorized technicians only)