Manuals
/
Elation Professional
/
Household Appliance
/
Indoor Furnishings
Elation Professional
DMX 101 manual Dimmer Control
Models:
DMX 101
1
19
24
24
Download
24 pages
42.87 Kb
16
17
18
19
20
21
22
23
<
>
Specs
While 4000 feet may be specified by the standard, most manufacturers recommend DMX runs of no more than 1000 feet 300 feet between devices before using a repeater to regenerate the signal. Each device should have input and output connectors, but these are usually wired together. No re-transmissionor amplification is performed
Signal
Many DMX devices such as dimmers and intelligent fixtures are capable of receiving several control channels at once. If a Dimmer has four channels capable of controlling four Light Fixtures , it must know which four control channels to receive. This is accomplished by setting a ‘base address’, or the DMX address for the first Light Fixture channel 005, in this example. The remaining Light Fixtures will be controlled by the next three sequential control channels. The DMX Decoder knows it needs only these four control channels, and will ignore the rest
Page 19
Image 19
5.1 Dimmer Control
5
www.elationlighting.com
19
Page 18
Page 20
Page 19
Image 19
Page 18
Page 20
Contents
7+92/87,21&206&+$1
DMX A DMX 512 HANDBOOK
DMX 101 A DMX 512 Handbook
Handbook Revision May
Elation Professional
Table of Contents
1. Introduction to DMX
2.1 USITT
2. Industry Standards
2.2 ESTA
2.4 EIA/TIA
2.3 ANSI
2.5 References
3. Theory of Operation
3.1 The Cable TV Analogy
Now imagine a simple DMX system Figure 2, where
Many DMX devices such as dimmers and intelligent fixtures are capable of receiving several control channels at once. If a Dimmer has four channels capable of controlling four Light Fixtures Figure 3, it must know which four control channels to receive. This is accomplished by setting a ‘base address’, or the DMX address for the first Light Fixture channel 005, in this example. The remaining Light Fixtures will be controlled by the next three sequential control channels. The DMX Decoder knows it needs only these four control channels, and will ignore the rest
3.2 DMX Communications
While 4000 feet may be specified by the standard, most manufacturers recommend DMX runs of no more than 1000 feet 300 feet between devices before using a repeater to regenerate the signal. Each device should have input and output connectors, but these are usually wired together. No re-transmissionor amplification is performed
3.3 Summary
4. Protocol Specifications
Wire
4.1 Connectors
Signal
4.2 Cabling
State
4.3 Data
Element
Description
5. Sample Applications
5.1 Dimmer Control
DMX 101 A DMX 512 Handbook
5.2 Intelligent Fixture Control
Elation Professional
5.3 Dimmer & Intelligent Fixture Control
DMX 101 A DMX 512 Handbook
5.4 Distributed Control
Elation Professional
Page
Tel 866-245-6726Fax
Elation Professional
A Division of the American DJ Group of Companies
6122 S. Eastern Avenue Los Angeles, CA 90040 USA
