Manuals / Brands / Laundry Appliance / Washer / Electrolux / Laundry Appliance / Washer

Electrolux WARNING, Removing door and hardware, Preparing to reverse door swing

Models: 134700400 137019200 137064300A 137067200 137098000

1 20

Download 20 pages, 4.41 Mb

13

WARNING

ELECTRICALSHOCKHAZARD

Failure to disconnect power source before servicing

could result in personal injury or even death.

B)RemovingDoorfromHinge

1 Reopen door to 90 degree angle.

2 Remove 4 long, course-thread, counter-sunk

hinge screws from door.

A) Removing Trim Ring

1 Open the door to a 90 degree angle.

2 Remove and save the trim plug and long,

course-thread, panhead screw.

3 Close the door.

4 Rotate the door trim approximately ¾”

counter-clockwise and pull it away from the

front of the door.

3 While supporting the weight of the door

with both hands, separate the door from the

hinge.

 4 Gentlyplacethedoorfacedownonaat,

covered work surface.

Reversing Door

Removing door and hardware

1 Be sure you have adequate swing area before reversing door.

2 You will need a screw driver with a #2 square bit.

3 Protect ﬂat work surface, such as top of washer or ﬂoor near

washer, with a soft cloth or towel.

4 Be sure washer is unplugged from power source!

Preparing to reverse door swing

Screwdrivers with

#2 square &

straight bit

Tools needed:

Contents

Main 2 Please read and save this guide Questions? Table of contents Keep a record for quick reference Safety Important Safety Instructions Recognize safety symbols, words and labels Save these instructions for future reference. WARNING Electrical system requirements Water supply requirements Drain system requirements Grounding requirements NOTE Clearance requirements IMPORTANT INSTALLATION IN A RECESS OR CLOSET 6 Installed washer dimensions Unpacking Washer Removing foam packaging IMPORTANT CAUTION EXCESSIVEWEIGHTHAZARD 8 Removing shipping hardware Installing hole plugs NOTE IMPORTANT Leveling your washer NOTE Connecting inlet water Connecting drain and electrical IMPORTANT NOTE Performing Installation Cycle NOTE WARNING Removing door and hardware B)RemovingDoorfromHinge A) Removing Trim Ring Preparing to reverse door swing 14 C) Removing Hinge from Front Panel D)RemovingDoorLockfromFrontPanel Reversing door and hardware E)ReattachingDoorLocktoFrontPanel F) Reattaching Hinge to Front Panel 16 K)ReattachingStrikerPlate J)ReinsertingLatchIndicator L)ReinsertingHolePlug Reattaching door and hardware Options WARNING ELECTRICALHAZARD Accessories Replacement parts: 1-877-4ELECTROLUX (1-877-435-3287)