21 electrolux electrical work
Connect the cable to the indoor unit
1. | The inside and outside connecting |
| cable can be connected without |
| removing the front grille. |
2. | Connecting cable between indoor unit |
| and outdoor unit shall be approved |
| polychloroprene sheathed flexible cord, |
Electrical box
cover
electrical work electrolux 22
< 24000 Btu's | < 24000 Btu's | |
COOL MODELS | HEAT AND COOL MODELS | |
"Connector A" or "Connector B" | "Connector A" or "Connector B" | |
Wire connector of indoor unit | ||
Wire connector of indoor unit | ||
|
| type designation |
| cord. |
3. | Lift the indoor unit panel up, remove |
| the electrical box cover by loosening |
| the screw. |
4. | Ensure the colour of wires of outdoor |
| unit and the terminal Nos. are the same |
| to the indoors respectively. |
5. | Wrap those cables not connected with |
| terminals with insulation tapes, so that |
| they will not touch any electrical |
| components. Secure the cable onto the |
1 2(N) 3 4
Cables
board
1 | 2(N) |
|
|
|
| 1 | 2(N) | 3 | 4 |
or
Cables | Cables | |
board | ||
board | ||
|
MODELS
24000 Btu's
1 2(N) 3 4
or
Cables
board
control board with the cord clamp. |
"Connector A”
Wire connector of indoor unit
< 18000 btu's CABLE (Heat & Cool model)
< 18000 btu's CABLE (Cool model)
Cable code | "Cable A" | or | "Cable B" |
Cable code |
| Cable code | |
|
| ||
40mm |
|
|
|
10mm |
|
|
|
| 40mm |
| 40mm |
|
|
| |
| 10mm |
| 10mm |
> 18000 btu's CABLE (Heat & Cool model)
"Cable C” Cable code
40mm
10mm
Cables
board