Electrolux EAS(C,E)12C2ASK(W,S,M) manual Clock adjustment, How the air conditioner works

Models: EAS(C,E)12P5ASK(W,S,M) EAS(C,E)09P5ASK(W,S,M) EAS(C,E)18C2ASK(W,S,M) EAS(C,E)12C2ASK(W,S,M) EAS(C,E)24C2ASK(W,S,M) EAS(C,E)18P5ASK(W,S,M) EAS(C,E)24P5ASK(W,S,M) EAS(C,E)09C2ASK(W,S,M)

1 28
Download 28 pages 50.6 Kb
Page 21
Image 21
39 electrolux clock adjustment

39 electrolux clock adjustment

Clock adjustment

Before you start operating the air conditioner, set the clock of the remote controller using the procedures given in this section. The clock panel on the remote controller will display the time regardless of whether the air conditioner is in use or not.

how the air conditioner works electrolux 40

How the air conditioner works

Automatic operation

When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the display panel of the indoor unit starts flashing.

Initial setting of the clock

1.After batteries are inserted in the remote controller, the clock panel will display "12:00" and begin to flash.

2.Press Clock adjustment or how the air conditioner works electrolux 40 buttons to set time.

3.Each time you press the button, the time moves forward or backward by one minute depending on which side you press. The time alters as quickly as you push the button.

4.Keep pressing the button without releasing, the time moves forward or backward by 10 minutes depending on which side you press.

5.When the right time is achieved,

press the CLOCK button or release

theHow the air conditioner works orAutomatic operation and wait for 5 seconds, the clock time stops

flashing and the clock starts operating.

Readjusting the clock

1.Press the CLOCK button on the remote controller for about 3 seconds, the colon in the clock display will start to flash. To set the new time, follow 2 and 5 of "Initial Setting of the clock".

1

1.The time of the CLOCK must be set before the AUTO-TIMER feature will operate. The CLOCK time can not be adjusted after setting the AUTO- ON/OFF timer.

2.Clock accuracy is within 15 seconds per day.

3.Static electricity or other factors (in case of extremely high voltage) can cause remote controller clock initialize. If your remote controller is initialized (flashing "12:00"), readjust the clock before you start operation.

1.Use the MODE .select button to select AUTO.

2.Push the TEMP button to set the desired room temperature. The most comfortable temperature setting are between 21ºC o to 28ºC.

3.Push the ON/OFF button to start the air conditioner. The OPERATION lamp on the display panel of the indoor unit lights. The

operating mode is AUTO FAN SPEED is automatically set and there are no indicators shown on the display panel of the remote controller.

4. Push the ON/OFF button again to stop the unit operation.

1.When you set the air conditioner in AUTO mode, it will automatically select cooling, heating(cooling/heating models only), or fan only operation depending on what temperature you have selected and the room temperature.

2.The air conditioner will control room temperature automatically round the temperature point set by you.

3.If the AUTO mode is uncomfortable, you can select desired conditions manually.

COOL / HEAT and FAN ONLY operation

1.If the AUTO mode is not comfortable, you may manually override the settings by using COOL, HEAT* or FAN** ONLY modes.

2.Push the TEMP button to set the desired room temperature. When in COOL mode, the most comfortable settings are 21ºC or above. When in HEAT mode, the most comfortable settings are 28 C or b elow.

3.Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.

4.Push the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your settings. Push the ON/OFF button again to stop this unit operation.

*Nota: Only for heating and cooling models

**Note: The FAN ONLY mode can not be used to control the temperature. While in this mode, only steps 1,3 and 4 may be performed.

Page 21
Image 21
Electrolux EAS(C,E)12C2ASK(W,S,M) manual Clock adjustment, How the air conditioner works, electrolux clock adjustment