EMC 69001166 manual Servername -type

Windows Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
8 FC4500 Storage	❑ From the computer connected to	❑ From the computer connected to
System	the storage system’s serial port,	the storage system’s serial port,
Set properties for	use the following Navisphere CLI	use the following Navisphere CLI
	commands to set the following	commands to set the following
PowerPath
	default storage-system	default storage-system
(cont.)
	properties:	properties:
	navicli -np -d device	navicli -np -d device
	failovermode 1	failovermode 1
	navicli -np -d device	navicli -np -d device
	arraycommpath 1	arraycommpath 1
	where device is the name of the	where device is the name of the
	computer port connected to the	computer port connected to the
	storage-system serial port (for	storage-system serial port (for
	example, com1).	example, com1).
	For existing HBAs		Navisphere CLI
	An existing HBA is one that is		reference
	registered with the storage system.
	❑ From the computer connected to
	the storage system’s serial port,
	use the following Navisphere CLI
	commands to set the following
	storage-system properties for the
	server’s existing HBA existing
	ports (initiators):
	navicli -np -d device
	storagegroup -sethost -host
	servername -type 3
	navicli -np -d device
	storagegroup -sethost -host
	servername -failovermode 1
	navicli -np -d device
	storagegroup -sethost -host
	servername -arraycommpath 1
	where
	device is the name of the
	computer port connected to the
	storage-system serial port (for
	example, com1).
	servername is the name of the
	server with the HBAs

7-50

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems