EMC 69001166 manual To which it is zoned with, AIX documentation Following AIX command

					AIX Installation Checklists
Task	With Access Logix		Without Access Logix		Reference Document
13 Server	❑	Checkpoint - Verify that each	❑	Checkpoint - Verify that each	AIX documentation
Make target SPs		HBA sees only the targets (SPs)		HBA sees only the targets (SPs)
		to which it is zoned with the		to which it is zoned with the
available (cont.)
		following AIX command:		following AIX command:
		lsdev -Cc array		lsdev -Cc array
	❑ Restart the Navisphere Host		❑ Restart the Navisphere Host		CX-Series Server
		Agent or run the Navisphere		Agent or run the Navisphere	Software for AIX
		Server Utility with the following		Server Utility with the following	installation guide
		AIX commands:		AIX commands:
		Host Agent/		Host Agent/
		etc/rc.agent stop		etc/rc.agent stop
		/etc/rc.agent start		/etc/rc.agent start
		Server Utility		Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil		/usr/lpp/HOSTUTIL/naviserverutil
	❑	Checkpoint - Use Navisphere	❑	Checkpoint - Use Navisphere	Navisphere Manager
		Manager’s Connectivity Status		Manager’s Connectivity Status	administrator’s guide
		dialog box to verify that each HBA		dialog box to verify that each HBA	and online help
		is registered with the storage		is registered with the storage
		system.		system.
	❑ List the LUNZ devices with the		❑ List the LUNZ devices with the		AIX documentation
		following AIX command:		following AIX command:
		lscfg grep LUNZ		lscfg grep LUNZ
	❑ Remove each LUNZ device with		❑ Remove each LUNZ device with
		the following AIX command:		the following AIX command:
		rmdev -dl hdiskn		rmdev -dl hdiskn
		where n is the hdisk number for		where n is the hdisk number for
		the LUNZ device.		the LUNZ device.
	❑ Execute the following AIX		❑ Execute the following AIX
		command:		command:
		emc_cfgmg.sh		emc_cfgmg.sh

PowerPath Checklist — Existing AIX Server and Existing Storage System

1-37