4.1.2Measurement - Multi Component Display:
Sequence setup
|
|
| ⇒ Change to the multi |
| CLD | component display | |
95.00 |
|
| ppm NOx | ||
|
|
|
|
| F1 |
0 | Range: 4 |
| Press | ||
| 250 | ||||
Sample press.: | 340 hPa |
|
| ||
Detector temperature: 0.5 | C |
|
| ||
Block temperature: | 51.5 | C |
|
| |
Converter temp.: | 360 | C |
|
| |
DISPLAY | STATUS | MENU | NEXT | INFO | |
F1 | F2 | F3 |
| F4 | F5 |
CLD
95.00 |
| CLD |
|
|
ppm NOx |
|
| ||
|
|
| ||
45.00 | MLT25/CH1/R2 |
|
| |
| ppm CO |
|
| |
333.0 | MLT25/CH2/R2 |
|
| |
| ppm SO2 |
|
| |
150.0 | MLT25/CH3/R2 |
|
| |
| ppm NO |
|
| |
20.00 | MLT25/CH4/R2 |
|
| |
|
| %O2 |
|
|
SELECT | STATUS | TAGS OFF |
| INFO |
F1 | F2 | F3 | F4 | F5 |
CLD
95.00 | CLD | |
ppm NOx | ||
|
45.00 MLT25/CH1/R2 ppm CO
333.0 MLT25/CH2/R2 ppm SO2
150.0 MLT25/CH3/R2 ppm NO
20.00 MLT25/CH4/R2 %O2
SELECT | STATUS | TAGS OFF |
| INFO |
F1 | F2 | F3 | F4 | F5 |
⇒Enable the selecting: ">"
F1
Press
or
Note:
If no channels of other analyzer modules are combined to the CLD, only the bargraph of the CLD module will be displayed. Then, the sequence setup will not be possible !
⇒Select the channel for position one
Press 
or
as often as necessary to put the > - mark into the selected line.
Example:
MLT channel 2 (SO2) shall appear at position one of the multi component display.
90003749(1)
NGA 2000 | 4 - 5 |