1 Introduction

This software manual describes step by step how to operate successfully with the ½ 19"

and 19" MLT analyzer module and analyzer of the NGA 2000 Series from . Chapter two shows the structure of the software menus. Chapter three describes the display and the keyboard of the analyzer. Chapter four describes the basic controls with detailed illustrations. So you can easily compare the actual display of the analyzer module with the illustrations of the manual.

Chapter five describes the expert controls and chapter six describes the technical level configuration. The layout of both chapters is not as detailed as in chapter four. Normally, the way to a certain software menu is described with the software catchwords, you have to press to reach this menu. You will find the illustration of the corresponding LCD screen at the end of the catchword listing. After that you can read the meaning of the functions and variables of each expert or technical level menu.

Some contents of the expert controls are not important for every customer. It depends on the configuration of your NGA 2000 system, relative to the following components:

♦ Control Module

CM

♦ Analyzer Module

AM

♦ Input/Output Modules

I/O's (SIO, DIO)

You can distinguish the following system units and SIO/DIO configurations:

System Unit

SIO/DIO-Configuration

Corresponding Chapter

CLD analyzer module (AM):1

⇒ Local I/O's are not existing

∗

⁄

∙ without front panel i.e.

 

 

 

without control unit

 

 

 

∙ can be combined with a

 

 

 

platform or an MLT analyzer

 

 

 

 

 

 

 

Platform (CM software):

⇒ 1 SIO and up to 4 DIO's

∗

chapter 5.2

∙ Control unit with front panel

can be installed in the

 

p. 29 to 44

∙ without measurement

platform

 

 

⇒ SIO and DIO can be

 

 

channels

 

 

configured for all channels

 

 

 

 

 

 

combined with the platform

 

 

 

 

 

 

MLT analyzer

⇒ 1 SIO and 1 DIO can be

∗

chapter 5.2

(CM and MLT AM software):

installed in the MLT

 

p. 29 to 44

∙ Analyzer with front panel

analyzer

 

 

 

 

 

∙ CM and AM software in the

⇒ SIO and DIO can be con-

figured for all channels

same analyzer,

combined with the MLT

i.e. all functions of the control

analyzer

unit and of the AM are united

 

in the same implement

 

1The configuration of other analyzer modules like MLT modules is described in their own manuals !

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000

1 - 1