Emerson RTM-ATCA-7350 manual Indicators Provided by the FC Daughter Card

FC Daughter Card Functional Description

Optical modules are used to provide the optical interfaces at the face plate. See Connecting Optical Fibers on page 36 for installing the optical modules. Optical modules for the FC daughter card must be obtained separately. Recommended modules are FINISAR FTRJ8519P1BNL-HW. FINISAR FTRJ8519P2BNL-HW.

The following figure shows the FC daughter card.

Figure 4-3 FC Daughter Card

ALM

RUN

ALM

RUN

Indicators

The FC daughter card provides the RUN and ALM indicators. You can monitor these indicators to diagnose the current status of the external FC interfaces.

The following table lists the two indicators provided by the FC daughter card.

Table 4-2 Indicators Provided by the FC Daughter Card

Indicator	Color	Meaning	Description
ALM	Amber	FC interface working	z Green on and amber on: RTM-ATCA-7350 is in
		state	the power-on process.
			z Green off and amber blinking: Signal
RUN	Green
			synchronization is lost.
			z Green off and amber on: The interfaces are
			obtaining signals.
			z Green on and amber off: The interfaces are
			ready for processing signals.
			z Green blinking and amber blinking: A fault
			occurs in the firmware.

RTM-ATCA-7350 Installation and Use (6806800H30F) 49