Manuals / Empire Comfort Systems / Household Appliance / Indoor Fireplace

Empire Comfort Systems BP)-1 Front door removal drawing Glass Cleaning, General Glass Information

Models: BP)-1 GN PV-28SV50-BN CP GP)-1 PV-28SV55-CN

1 56
Download 56 pages 57.58 Kb
Page 46
Image 46

MAINTENANCE

Figure 55

Front door removal drawing

Glass Cleaning

It will be necessary to clean the glass periodically. During start- up, condensation, which is normal, forms on the inside of the glass and causes lint, dust and other airborne particles to cling to the glass surface. Also, initial paint curing may deposit a slight film on the glass. It is therefore recommended that the glass be cleaned two or three times with a non-abrasive household cleaner and warm water (we recommend gas fireplace glass cleaner) after the initial burn. We do not recommend using packaged spray type household glass cleaner. After that, the glass should be cleaned two or three times during each heating season depending on the circumstances present.

General Glass Information

Only glass approved for use in Empire Comfort Systems, Inc. fire- place may be used for replacement. The glass replacement must be done by a licensed or qualified service person.

WARNING:

1.The use of substitute glass will void all product warranties.

2.Care must be taken to avoid breakage of the glass.

3.Under no circumstances should this appliance be operated without the glass front or with a broken glass front. Replace- ment of the glass (with gasket) as supplied by the manufac- turer must be done by a qualified service person.

4.Do not abuse the glass by striking or hitting the glass.

WARNING: Do not use abrasive cleaners on glass. Do not attempt to clean glass when glass is hot.

Glass Assembly Replacement

1.Remove cabinet top.

2.Pivot left and right front panels open.

3.Release two door latches on left and right of firebox.

4.Grasp glass frame and carefully pull toward you.

5.Place glass frame assembly on non-abrasive surface. The ex- terior of the glass frame assembly should be facing the non- abrasive surface.

6.Insert a putty knife between glass and bottom corners on frame. Carefully separate glass from frame.

7.Use putty knife to remove silicone and gasket material from frame. Surface of frame must be clean and dry.

8.At each corner of frame apply two (2) three inch beads of high temperate (orange) silicone.

9.With thin gasket on glass facing silicone on frame, insert glass into frame. Carefully press the glass onto frame in order to have contact between glass and silicone.

10.Allow silicone to set-up for an adequate time.

11.Gently place glass frame back into firebox.

12.Close the 2 door latches on left and right of firebox.

13.Pivot left and right front panels closed.

14.Replace cabinet top.

LOG SUPPORT PLATE

REAR BURNER

BURNER PLATE

FLAME SENSOR

FRONT BURNER

IGNITOR ASSEMBLY

Figure 56

Main Burner Drawing

Cleaning Main Burner

Remove main burner and apply air pressure inside the throat and ports of the main burner.

Removing HSI Flame Sensor, Blower and Orifice

1.Remove front door assembly. See Figure 55.

2.Remove logs from firebox.

3.Remove installation bracket and gasket from underside of firebox (1 screw).

4.Disconnect flame sensor and HSI connector from wiring har- ness.

5.Remove log support from inside firebox (13 screws).

6.Remove HSI from log support (13 screws).

7.Remove flame sensor from log support (1 screw).

8.Remove burners from firebox (1 screw).

9.Once burners are removed, orifices are exposed.

Page 46

22618-17-0308

Page 45 Page 47
Page 46
Image 46
Empire Comfort Systems BP)-1, PV-28SV50-BN, GN, GP)-1 Front door removal drawing Glass Cleaning, General Glass Information
Page 45 Page 47

BP)-1, GN, PV-28SV50-BN, CP, GP)-1 specifications

Empire Comfort Systems is renowned for producing high-quality heating products, and the GP-1, GN, PV-28SV55-CN, CP, BP-1 is no exception. This comprehensive heating solution combines innovative technologies with practical features designed to enhance comfort and efficiency in various environments.

The GP-1 model is a direct vent gas log set that showcases the brand's commitment to producing clean and efficient heating options. One of its standout characteristics is its ability to operate without needing a traditional chimney, making it an excellent choice for homes where a fireplace may not have been previously installed. The direct vent design uses outside air for combustion, ensuring optimal efficiency while minimizing energy loss.

What sets the GN model apart is its impressive output capacity. Engineered for robustness, this gas heater can deliver significant warmth, making it ideal for larger spaces or homes in colder climates. The unit is designed to heat quickly and evenly, providing a comfortable living environment without drastic fluctuations in temperature.

The PV-28SV55-CN brings advanced technology into the fold with its vent-free capabilities. This feature allows for installation flexibility, as it can be positioned in various spaces without requiring venting to the outside. This characteristic not only simplifies installation but also allows users to enjoy the warmth without the hassle of dealing with exterior vents.

The CP and BP-1 models focus on user convenience and safety. Both are equipped with state-of-the-art control systems that allow users to manage their heating options easily. The intuitive controls facilitate temperature adjustments, ensuring users can maintain their preferred heat levels effortlessly. Additionally, safety features such as oxygen depletion sensors (ODS) provide peace of mind by automatically shutting off the unit if unsafe conditions arise.

In terms of design, Empire Comfort Systems has ensured that these models fit seamlessly into any décor. The stylish aesthetic, combined with a variety of finish and style options, allows homeowners to choose a gas fireplace that complements their interior design.

In conclusion, the Empire Comfort Systems GP-1, GN, PV-28SV55-CN, CP, BP-1 represents a harmonious blend of advanced technology, safety features, and elegant design. It is an exemplary choice for anyone seeking to enhance their home's warmth and efficiency while enjoying the beauty and ambiance a gas heating solution can provide. With a focus on comfort, reliability, and aesthetic appeal, these models stand out as top contenders in the market for home heating solutions.