BPF-015 User Manual 3100554091
Version 1.0
Oct.
200
7
Installation Steps
1. Please insert the CD into the CD-ROM drive of your
computer.
2.Please connect your Key Chain Photo Frame to your
PC or laptop via attached USB adapter.
3.When you connect the Key Chain Photo Frame in the
first time, Windows will pop up a wizard to install driver for
new hardware, please follow the on-screen instructions
and select “X:\\BPF-015 1.5” Square\driver\GM3615.inf”
(X:\\ stands for CD-ROM) as the driver. When the driver
installation is done, please click “Setup.exe” in BPF-015
1.5” Square folder to install the Photo Viewer application
and follow the on-screen instructions to finish the
installation. Once you finish the installation, please click
“ Start” ”Programs” ” BPF-015 Photo Viewer” and
the Photo Viewer application will run.
Please follow the following instructions to download or
upload photos into or from your Key Chain Photo Frame.
(1)
Add photos:
You may add a single photo or multiple ones into your
Key Chain Photo Frame. Please select photos in your
PC or laptop’s respective folder and right click the
selected photo to select “Insert Full”, “Insert
Original Ratio”, or “Insert Full 1:1” and the photo
selected will be drag to the “ Photo Download /
Upload Section”.
Once the photo is dragged to “Photo
Download/Upload Section”, you may right click to
delete, rotate, or append and click “Append” icon on
the tool bar to add photo into your Key Chain Photo
Frame.
Attention:
1. When you connect your Key Chain Photo
Frame to the PC or laptop, you are charging
your Key Chain Photo Frame at the same time.
Please charge your Key Chain Photo Frame for
4 hours before the first time usage.
2.