APPENDIX - H
TROUBLE SHOOTING
Most problems can be solved by referring to the USBIRD MANUAL.
Before you use the recorder, make sure memory has been erased. If you press the record button and see three blinking lights you must erase the recorder memory. The memory cannot not be overwritten, after you completely erase the memory the recorder will begin recording.
Always test the recorder before you deploy it. Make sure audio and video are working properly. Always use fresh batteries, and give rechargeable batteries enough time to recharge.
All external cables and connectors are fastened securely and all cameras are in focus.
All external microphones are in a good audio position to capture audio.
The external on / off switch should be on the off position when you are attaching the switch to the recorder.
No other USB devices can be attached to the computer while you are using a recorder. If you need to attach another USB device such as a USB printer, scanner, mouse, use a USB HUB. The USB HUB should be the only device attached to the computer and all devices should be plugged into the USB HUB.
VIDEO DOES NOT PLAYBACK for USBird installations 2.6x and older. Install
MJPEG codec.
66