Port Configuration View
SMT Information
Configuration Views Fast Ethernet SmartSwitch Module
3-8 Management Module Guide

SMT Information

This section of the FddiMAC Device Configuration view provides the following
configuration information on the FDDI SMT:
SMT Version
The version of Station Management (SMT) running.
OBS Present
Indicates whether an Optical Bypass Switch (OBS) is connected.
T-Notify (sec)
The timer value, in seconds, used in Neighbor Notification Protocol. The
allowed range is from 2 to 30 seconds.
T-Req (milli sec)
The Target Token Rotation Time (TTRT) bid, in milliseconds, made by this
concentrator.
T-Neg (milli sec)
The winning TTRT bid, in milliseconds, on the ring.
TVX (milli sec)
The valid transmission time, in milliseconds.
Port Configuration View
The Port Configuration view provides information on the configuration and
operating status of the ports. To access this view, do the following:
1. Highlight the Logical Port icon in the Chassis Device view.
2. From the View menu, select Icon Subviews -> Port Configuration
View.
The Port Management section of the FDDI Port Configuration view provides
the following information:
Port Action
Allows you to enable/disable the port. The state returns to “Other” once the
port has been Enabled/Disabled.
Port State
The status of this port. Possible states are disabled, connecting, standby, and
active.
Port Type
The type of port. Possible port types are A_Port, B_Port, Slave, or Master.