Enterasys Networks N Standalone (NSA) Series 14.3.2 Configuring RADIUS

Security Configuration Command Set
Configuring RADIUS
Matrix NSA Series Configuration Guide 14-9
14.3.2 Configuring RADIUS
Purpose
To perform the following:
•Review the RADIUS client/server configuration on the device.
•Enable or disable the RADIUS client.
•Set local and remote login options.
•Set primary and secondary serve r parameters, including IP address, timeout period,
authentication realm, and number of user login attempts allowed.
•Reset RADIUS server settings to default values.
•Configure a RADIUS accounting server.
Commands
The commands used to review and configure RADIUS are listed below and described in the
associated section as shown:
•show radius (Section 14.3.2.1)
•set radius (Section 14.3.2.2)
•clear radius (Section 14.3.2.3)
•show radius accoun ting (Section 14.3.2.4)
•set radius accounting (Section 14.3.2.5)
•clear radius accounting (Section 14.3.2.6)