Installation
TYPICAL THROUGH WALL WITH EXTERIOR BLOWER KIT INSTALLATION - HORIZONTAL TERMINATION:
ElectricalCable
Bern
90°Elbow
45°Elbowwith Rodent
screenor stainless
steeltermination hood
2ft(610mm) Riser
PipeAdaptor
ExteriorBlower
andHousing
WallStrap
Tosupply power to
the exhaust blower
Install an amour coated electrical cable from the exhaust blower housing, through the wall thimble plate
and attach to the pre drilled hole in the left hand rear hopper pillar. Hook up to wires from the exhaust
blower wiring harness.
All electrical connections must be in accordance to local code requirements
NOTE:
Ensure that all interior vent connections are sealed by placing a small bead of high temperature silicone
around each chimney connection.
Also ensure that all vertical vent sections are properly supported and that all clearances to combustibles
are maintained in accordance with the vent manufacturer’s specifications.
Figure 19: Through Wall Installation with Exterior Blower Kit.
Figure 20: Through Wall Installation with Exterior Blower Kit; Side View.
16