4. Push-pulltractor feed
Set therelea se lever tothe REARPUSH/FRONT PUSH position.
Loadpape r from thefront or rearentrance. Remove
thepape r ejectassembly andattach the pulltractor unit. Remove
any slackin thepaper between the platenand pull tractor. Preciselyadjust the
horizontal positionof the pulltractor and push tractor. Multipart paper must be
carbonless. Do notperform reverse feeds
greater than 1/6 inch. Do not performreverse feeds
afterthe paper end has been detected.
1.2.4 Paper Specifications
This sectiondescribe sthe printablearea and typesof paper that can beused inthis printer.
Cut Sheets
Paper/me diaspecifications Thefollowing tableshows specifications for cutsheets.
Table 1-8 Specifications for Cut Sheets (Single Sheet,Not Multipart)
Front Entry Rear Entry
Minimum Maximum Minimum Maximum
Width 101 mm (4.0") 420 mm (16.5") 101mm (4.0") 420 mm (16.5")
Length 147 mm (5.8") 420 mm (16.5") 101 mm (4.0") 420 mm(16.5")
Thickness 0.065 mm(0.0025") 0.14 mm (0.0055") 0.065 mm(0.0025") 0.14 mm (0.0055")
Weight 52.3 g/m2(14 lb) 90 g/m2(24 lb) 52.3 g/m2(14 lb) 90 g/m2(24 lb)
Quality Plain paper, recycled paper.
Not curled, folded, or crumpled. Plain paper, recycled paper.
Not curled,folded, or crumpled.
Table 1-9 Specifications for Cut Sheets (Multipart)
Front Entry RearEntry
Minimum Maximum Minimum Maximum
Width 101 mm (4.0") 420mm (16.5") 101 mm (4.0") 420 mm(16.5")
Length 147 mm (5.8") 420 mm (16.5") 101 mm(4.0") 420 mm (16.5")
Copies 1 original + 5 copies 1 original + 5 copies
Total
thickness 0.12 mm (0.0047") 0.46 mm (0.018") 0.12 mm (0.0047") 0.46 mm (0.018")
Weight ❇40 g/m2(12 lb) 58 g/m2(15 lb) 40 g/m2(12 lb) 58 g/m2(15 lb)
Quality Plain paper, recycled paper.
Not curled,folded, or crumpled. Plain paper, recycled paper.
Not curled,folded, or crumpled.
Binding Aline of glue at the top or one side of the
form. A line of glueat the top of the form.
❇This weight is for onesheet of the multipartform.
Product Description FX-2170 Service Manual
1-8 Rev.A